Table of Contents
Advertisement
Viewing the test log
The test log will not contain any information until after the diagnostic program has
run.
Note: If you already are running the diagnostic programs, begin with step 3..
To view the test log:
1.
Turn on the server/workstation and watch the screen.
If the server/workstation is on, shut down your operating system and restart the
server/workstation:
2.
When the message F2 for Diagnostics appears, press F2.
If a power-on password is set, the server/workstation prompts you for it. Type in
the appropriate password; then, press Enter.
3.
When the Diagnostic Programs screen appears, select Utility from the top of the
screen.
4.
Select View Test Log from the list that appears; then, follow the instructions on
the screen.
The system maintains the test-log data while the server/workstation is powered
on. When you turn off the power to the server/workstation, the test log is
cleared.
17
Diagnostics
Advertisement
Table of Contents
