1.
Restart the computer and watch the monitor screen.
2.
When the message Press F1 for Configuration/Setup appears, press F1.
3.
From the main menu, select Devices and I/O Ports; then, press Enter.
Note: The Devices and I/O Ports choice appears only on the full configuration
menu. If you set two levels of passwords, you must enter the
administrator password to access the full configuration menu.
4.
Select the serial port; then, use the arrow keys to advance through the settings
available.
5.
Select Save Settings; then select Exit Setup to exit from the Configuration/Setup
Utility main menu.
97
Installing options