Adjust The Rear Shock Absorber; Light Beam Adjustment For Headlight - VOGE DS525X 2019 Operation Manual

Adjust the rear shock absorber

Adjust the rear shock absorber is for suiting different
drivers, loadings, and road conditions.
·The pre-pressure of spring is adjustable.
–Look up and down, turn the adjustor 1 anticlockwise, the
spring got soft.
–Look up and down, turn the adjustor 1 clockwise, the
spring got hard.

Light beam adjustment for headlight

·The headlight shall keep a reasonable height when the shock absorber under different loadings.
·For ensuring the driving safety at night, adjust the angle of light beam for suiting different loadings.
–The adjusting screw is behind the headlight, please adjust by cross screwdriver refer to figure 2.
–Turn it clockwise for letting the light beam low.
–Turn it anticlockwise to let the light beam high.
!
·Adjust the pre-loading for shock absorber at
will is not allowed, unsuitable adjustment may
decrease your control on motorcycle.
·In case the adjustment is needed, contact the
VOGE authorized distributor for this work.
Danger
-
Adjust the pre pressure for shock absorber needs
,
special tools the VOGE authorized distributor
provides this ser vice
In case you are not sure the correct height of light beam,
contact and ask the VOGE authorized distributor for this
work.
1
!
Caution
.
!
Danger
1
41