Table of Contents
Advertisement
4
Installation
Unpack and check carefully there is no transportation damage before using the unit.
Keep the equipment packaging. To fully protect the product against vibration, dust
and moisture during transportation or storage use the original packaging or your
own packaging material suitable for transport or storage, respectively.
Lift the device only at the base. When lifted at the rotatable mounting, the device
may be damaged.
You can install the device standing or hanging. When in use, the device must be
mounted at a solid surface or clamped to an approved truss.
Work from a stable platform whenever you install or move the device or when you
perform any kind of maintenance. Block access under the work area.
WARNING!
Risk of injury caused by falling due to unsuitable trusses and other
fixtures!
If trusses or other fixtures are not designed for the weight of the
intended number of moving heads, falling can cause severe injury and
considerable damage.
Before mounting, ensure that the load capacity of trusses and other fix‐
tures is sufficient for the intended number of devices. Take into account
any additional load that affects the load bearing parts due to the move‐
ment of the head.
When installing and operating, make sure to follow the standards and
regulations that apply in your country.
Always secure devices with a secondary safety attachment, such as a
safety cable or a safety chain.
CAUTION!
Risk of injury due to unexpected movements of the device!
The device head may perform fast movements and generate very bright
light. This is the case immediately after the device is switched on, in
automatic or remote operation, and when a connected DMX controller
is switched off. Persons who are in the immediate vicinity of the device
may be injured or frightened by this.
Make sure that there are no obstacles within the movement range of
the mirror, and that no persons are in the immediate vicinity of the head
before switching it on and during its operation.
Switch off the device before any work is performed in the movement
range or immediate vicinity of the device, or if unauthorised persons are
in that area.
Installation
Tristan 200
9
Moving Head
Advertisement
Table of Contents
