Table of Contents
Advertisement
Operation
Behaviour on DMX signal interrupt
DMX value display
Activating or deactivating pan inver‐
sion
Activating or deactivating tilt inver‐
sion
Tristan 200
14
Moving Head
4.
Confirm your selection with [ENTER].
ð The desired mode is saved.
5.
To exit the menu, press [MENU], or wait 30 seconds.
1.
Open the main menu.
2.
Navigate to 'DMX Settings è No DMX Status'.
3.
Use [UP] and [DOWN] to select one of the following statuses:
'Blackout' (The lamp turns off)
n
'Hold' (The device continues to operate in the current mode with the last
n
active DMX values until the signal returns)
'Manual' (The device accepts the DMX value stored in the 'Manual Test'
n
menu)
4.
Confirm your selection with [ENTER].
ð The desired status is saved.
5.
To exit the menu, press [MENU], or wait 30 seconds.
1.
Open the main menu.
2.
Navigate to 'DMX Settings è View DMX Value'.
3.
Use [UP] and [DOWN] to select the desired DMX channel, for which the value is
to be displayed.
4.
To exit the menu, press [MENU], or wait 30 seconds.
1.
Open the main menu.
2.
Navigate to 'Fixture Settings è Pan Invert'.
3.
Use [UP] and [DOWN] to select 'No' (Pan Invert deactivated) or 'Yes' (Pan Invert
activated).
4.
Confirm your selection with [ENTER].
ð Pan inversion is activated or deactivated.
5.
To exit the menu, press [MENU], or wait 30 seconds.
1.
Open the main menu.
2.
Navigate to 'Fixture Settings è Tilt Invert'.
3.
Use [UP] and [DOWN] to select 'No' (Tilt Invert deactivated) or 'Yes' (Tilt Invert
activated).
4.
Confirm your selection with [ENTER].
ð Tilt inversion is activated or deactivated.
5.
To exit the menu, press [MENU], or wait 30 seconds.
Advertisement
Table of Contents
