Table of Contents
Advertisement
7.6 Replacing gobos
#
#
ö
1.
Unscrew the two screws 1 from the gobo wheel mount and remove the gobo
wheel mount.
#
$
%
#
%
2.
Loosen the eight screws 2, but do not remove them fully.
3.
Unscrew the two screws 3 and remove the positioning plate.
4.
Unscrew the six screws 4 and remove the two gobo wheels.
&
5.
Press down the gobo bracket of the gobo to be replaced on the outside of
gobo wheel 5 and pull it out slowly.
6.
Check that the gobo is covered with glass adhesive. If this is the case, use a
glass cleaner to remove the glass adhesive. This is to prevent the gobo being
damaged.
Operation
Tristan 200
27
Moving Head
Advertisement
Table of Contents
