Table of Contents
Advertisement
Installation
Mounting options
Tristan 200
10
Moving Head
NOTICE!
Risk of overheating and fire due to inadequate distance and bad
ventilation!
If the distance between the light source and the illuminated surface is
too short or the device is badly ventilated, the device can overheat and
cause fires.
Make sure that illuminated surfaces are more than 2 m away.
Do not operate the device in ambient temperatures above 40 °C.
Always ensure sufficient ventilation at the operating location.
NOTICE!
Damage to the device due to operation in confined environments!
If the device is operated in confined environments, movements of the
device head can result in collisions, and the device can be damaged.
Ensure that there is sufficient space around the device to allow move‐
ments of the device head.
Please note that this device must not be connected to a dimmer.
You can install the unit in hanging or standing position. When in use, the device must
always be attached to a solid surface or an approved mount. Use the openings pro‐
vided on the two-piece bracket for attaching.
The installation environment must be able to support 10 times the weight of the
devices to be attached without being deformed.
Always work from a stable platform whenever installing, moving or servicing the
unit. In doing so, the area underneath the device must be cordoned off.
Additionally secure the device with a safety cable that can bear at least 12 times the
weight of the device to be attached.
Advertisement
Table of Contents
