Table of Contents
Advertisement
Activating or deactivating "Tilt / Pan
Feedback"
Specify dimming mode
Specify the dimmer speed
Inverting the display
This function causes the pan or tilt positions to be automatically adjusted to the cor‐
rect position when they are twisted. To enable or disable this function, proceed as
follows:
1.
Open the main menu.
2.
Navigate to 'Fixture Settings è P/T Feedback'.
3.
Use [UP] and [DOWN] 'No' (Tilt / Pan Feedback deactivated) or 'Yes' (Tilt / Pan
Feedback activated).
4.
Confirm your selection with [ENTER].
ð The "Tilt / Pan Feedback" function is activated or deactivated.
5.
To exit the menu, press [MENU], or wait 30 seconds.
1.
Open the main menu.
2.
Navigate to 'Fixture Settings è Dimmer Curve'.
3.
Use [UP] and [DOWN] to select one of the following settings:
'Linear' : The light intensity increases linearly with the DMX value.
n
'Square Law' : The light intensity is finer in the lower range, and can be
n
adjusted in the upper range.
'Inv SQ Law' : The light intensity is coarser in the lower range, and can be
n
adjusted in the upper range.
'S Curve' : The light intensity is fine in the upper and lower range, and can
n
be adjusted in the mid range.
4.
Confirm your selection with [ENTER].
ð The desired setting is saved.
5.
To exit the menu, press [MENU], or wait 30 seconds.
1.
Open the main menu.
2.
Navigate to 'Fixture Settings è Dimmer Speed'.
3.
Use [UP] and [DOWN] to select 'Fast' or 'Smooth' .
4.
Confirm your selection with [ENTER].
ð The dimmer speed is specified.
5.
To exit the menu, press [MENU], or wait 30 seconds.
1.
Open the main menu.
2.
Navigate to 'Display Settings è Display Invert'.
3.
Use [UP] and [DOWN] to select 'No' (Display normal) or 'Yes' (Display inverted).
ð Selecting 'Yes' rotates the display by 180°.
4.
Confirm your selection with [ENTER].
ð The desired setting is saved.
5.
To exit the menu, press [MENU], or wait 30 seconds.
Operation
Tristan 200
15
Moving Head
Advertisement
Table of Contents
