Table of Contents
Advertisement
Tilt zero position setting (tilt offset)
Colour wheel zero position setting
(colour offset)
Gobo 1 zero position setting
R gobo 1 zero position setting
Fixed gobo 2 zero position setting
1.
Open the settings menu.
2.
Navigate to 'Tilt'.
3.
Use [UP] and [DOWN] to select a value between –128 and 127.
4.
Confirm your selection with [ENTER].
ð The settings are saved and immediately effective.
5.
To exit the settings menu, press [MENU], or wait 30 seconds.
1.
Open the settings menu.
2.
Navigate to 'Color'.
3.
Use [UP] and [DOWN] to select a value between –128 and 127.
4.
Confirm your selection with [ENTER].
ð The settings are saved and immediately effective.
5.
To exit the settings menu, press [MENU], or wait 30 seconds.
1.
Open the settings menu.
2.
Navigate to 'Gobo1'.
3.
Use [UP] and [DOWN] to select a value between –128 and 127.
4.
Confirm your selection with [ENTER].
ð The settings are saved and immediately effective.
5.
To exit the settings menu, press [MENU], or wait 30 seconds.
1.
Open the settings menu.
2.
Navigate to 'R-Gobo1'.
3.
Use [UP] and [DOWN] to select a value between –128 and 127.
4.
Confirm your selection with [ENTER].
ð The settings are saved and immediately effective.
5.
To exit the settings menu, press [MENU], or wait 30 seconds.
1.
Open the settings menu.
2.
Navigate to 'Fix Gobo2'.
3.
Use [UP] and [DOWN] to select a value between –128 and 127.
4.
Confirm your selection with [ENTER].
ð The settings are saved and immediately effective.
5.
To exit the settings menu, press [MENU], or wait 30 seconds.
Operation
Tristan 200
23
Moving Head
Advertisement
Table of Contents
