Related Manuals for Ignition Air Base 600 with protective cover
Summary of Contents for Ignition Air Base 600 with protective cover
- Page 1 Manual Air Base 4 Air Base 400 with with protective cover protective cover protective cover...
-
Page 2: Table Of Contents
Table of contents Safety instructions ..........................3 1.1. For safe and efficient operation ....................3 Designated use ..........................4 2.1. Overhead installation ....................... 5 Introduction ............................7 3.1. Technical drawing ........................7 Connections ............................. 8 4.1. Electrical connections ......................8 4.2. -
Page 3: Safety Instructions
1. Safety instructions • This device is only suitable for outdoors combined with the protective cover. device is only suitable for outdoors combined with the protective cover. device is only suitable for outdoors combined with the protective cover. • All modifications to the device will void the warranty. All modifications to the device will void the warranty. -
Page 4: Designated Use
2. Designated use This device was developed for professional use on stages, in discos, theatres etc. The device is only approved for a connection up to 230V 50/60 Hz AC voltage and only for indoor use. Combined with the protective cover it can also be used outside. Regular breaks during operation increase the lifetime of your device. -
Page 5: Overhead Installation
2.1. Overhead installation Overhead installation Danger of life! Danger of life! You have to observe the regulations of BGV C1 (formerly VBG 70) and You have to observe the regulations of BGV C1 (formerly VBG 70) and You have to observe the regulations of BGV C1 (formerly VBG 70) and EN60598-2-17 17 Installations are to carry out by skilled personnel only. - Page 6 The maximum drop exceed must not exceed 20cm. A safety rope once exposed to failing load or damaged may not be used furthermore. Adjust the desired inclination angle via the mounting bracket and tighten the screw 6 / 12...
-
Page 7: Introduction
3. Introduction Thank you for buying the Air Base 600 with protective cover. It is a powerful device. For a successful installation and operation, please read this manual carefully. 3.1. Technical drawing 7 / 12... -
Page 8: Connections
4. Connections 4.1. Electrical connections If you wish to change the power supply settings, see the chapter Appendix. Connect the fixture to the mains with the enclosed power cable and plug. The earth has to be connected. Cable (EU) Cable (US) International Brown Black... -
Page 9: Control
5. Control 1. Light Source Switch On-/Off-Switch for the device which is connected to 6. 2. Mains In 3. Fan Setting the fan speed in 4 steps. 4. DMX In/Out DMX-In/Out 3pol/5pol 5. On/Off On-/Off-Switch for the device 6. Schutzko-plug Connect a device. -
Page 10: Technical Data
6. Technical data Power supply Voltage AC 110-240 V; 50/60 Hz Power consumption max. 25 W Connections Strom in PowerCon XLR in/out 3pol/5pol Hardware Protection class IP20 (without protection cover) Dimensions (L/B/H) 600 x 600 x 172 mm Weight 10,5 kg 10 / 12... - Page 11 11 / 12...
- Page 12 Importeur: B & K Braun GmbH Industriestraße 2 D-76307 Karlsbad www.bkbraun.com info@bkbraun.com 12 / 12...