Operation
Prism zero position setting
R prism zero position setting (R prism
adjustment)
Frost zero position setting (frost
adjustment)
Angle zero position setting
Setting zero position focus
Tristan 200
24
Moving Head
1.
Open the settings menu.
2.
Navigate to 'Prism'.
3.
Use [UP] and [DOWN] to select a value between –128 and 127.
4.
Confirm your selection with [ENTER].
ð The settings are saved and immediately effective.
5.
To exit the settings menu, press [MENU], or wait 30 seconds.
1.
Open the settings menu.
2.
Navigate to 'R-Prism'.
3.
Use [UP] and [DOWN] to select a value between –128 and 127.
4.
Confirm your selection with [ENTER].
ð The settings are saved and immediately effective.
5.
To exit the settings menu, press [MENU], or wait 30 seconds.
1.
Open the settings menu.
2.
Navigate to 'Frost'.
3.
Use [UP] and [DOWN] to select a value between –128 and 127.
4.
Confirm your selection with [ENTER].
ð The settings are saved and immediately effective.
5.
To exit the settings menu, press [MENU], or wait 30 seconds.
1.
Open the settings menu.
2.
Navigate to 'Angle'.
3.
Use [UP] and [DOWN] to select a value between –128 and 127.
4.
Confirm your selection with [ENTER].
ð The settings are saved and immediately effective.
5.
To exit the settings menu, press [MENU], or wait 30 seconds.
1.
Open the settings menu.
2.
Navigate to 'Focus'.
3.
Use [UP] and [DOWN] to select a value between –128 and 127.
4.
Confirm your selection with [ENTER].
ð The settings are saved and immediately effective.
5.
To exit the settings menu, press [MENU], or wait 30 seconds.