Table of Contents
Advertisement
Fehlerbehebung
10
Fehlerbehebung
Tristan 200
36
Moving Head
NOTICE!
Data transfer errors due to improper wiring!
If the DMX connections are wired incorrectly, this can cause errors
during the data transfer.
Do not connect the DMX input and output to audio devices, e.g. mixers
or amplifiers.
Use special DMX cables for the wiring instead of normal microphone
cables.
In the following we list a few common problems that may occur during operation.
We give you some suggestions for easy troubleshooting:
Symptom
The unit does not work, no
light, the fan does not run
No response to the DMX con‐
troller
If the procedures recommended above do not succeed, please contact our Service
Center. You can find the contact information at www.thomann.de.
Remedy
Check the mains connection and the main fuse.
1. Check the DMX connectors and cables for
proper connection.
2. Check the address settings and the DMX
polarity.
3. Try using another DMX controller.
4. Check to see if the DMX cables run near or
alongside to high voltage cables that may cause
damage or interference to DMX interface circuits.
Advertisement
Table of Contents
