Table of Contents
Advertisement
Operation
Tristan 200
28
Moving Head
'
7.
Remove spring lock 6 from the gobo bracket. Use tweezers to do so.
8.
Remove the gobo from the gobo bracket.
(
9.
Insert the new gobo into the gobo bracket with the shiny side facing the light
source so that positioning points 7 are on top of each other. Ensure that you do
not touch the surface of the gobo with your fingers.
10.
Reinsert the gobo bracket in the gobo wheel in such a way that it is exactly
centred in the gobo wheel.
11.
Reattach the gobo wheels to the gobo wheel mount and secure it with screws
4.
12.
Reinsert the positioning plate and secure it with screws 3.
13.
Tighten the eight screws 2 again.
Advertisement
Table of Contents
