1. Push down on the blue release lever on the moistener.
2. Pull the moistener straight out to the left away from the machine.
3. Pull up to remove the holder and wick from the moistener.
4. Separate wick from metal holder.
5. Clean the wick in plain water, and rinse thoroughly. Blot the wick with a paper towel to remove
excess water.
6. Reinstall the wick back in the holder.
7. Reinstall the wick and holder assembly into moistener. Be sure the holder is seated against the
top of the wick.
Pitney Bowes
Operator Guide
September 2023
Maintenance
59