Turning The Date On/Off For A Meter Stamp; Printing Only The Date And Time (No Meter Stamp) - Pitney Bowes DMI100i Operator's Manual

What You Can Print on Mail Pieces

Turning the Date On/Off for a Meter Stamp

Most mailings print the date as part of the meter stamp but for certain classes of mail, you may want to
turn off the date. Call your local post office or visit www.pitneybowes.com for further information.
1. Press Print Menu.
2. Press Page Down and select Omit day/date/other.
3. Select either Omit the day or Omit the date.
4. You return to the Home Screen and either the day or date does not display or print on the meter
stamp.
To restore the day or date, perform Steps 1 and 2 above, but select Restore the day or Restore the
date which now displays in Step 3.

Printing only the date and time (no meter stamp)

You may want to use this feature to time-stamp incoming mail or sensitive documents.
1. Press Print Menu.
2. Select Date and Time Only.
3. Place the envelope up against the registration wall of the system and slide it to the right until the
system grasps it. The system prints the time and date and ejects the envelope/tape sheet.
NOTE: Make sure you orient the mail piece so the date and time prints on a blank section of the
mail piece.
4. Select Exit Date and Time when finished to return to the Home screen.
Pitney Bowes Operator Guide September 2023 26