Adding And Removing Inscriptions - Pitney Bowes DMI100i Operator's Manual

What You Can Print on Mail Pieces
4. Place the envelope/tape sheet up against the registration wall of the system and slide it to the
right until the system grasps it. The system prints the ad, time and date, and ejects the
envelope/tape sheet.
Make sure you orient the mail piece so the date and time prints on a blank section of the mail
piece.
5. Select Exit Ad Date & Time when finished to return to the Home screen.

Adding and Removing Inscriptions

Important! The postal inscription that prints on the meter stamp is a separate setting from the postal
class you choose when you rate your mailpiece. You rate the mailpiece as part of the procedure(s)
for running mail; the inscription and the class should match for your mailpiece. However, if you
change one of these on your mailing machine, it does NOT automatically change the other. If you
change the inscription be sure it matches the class you select when processing mail. Refer to the
Running Mail topic for more information.
1. From Home screen, press Page Down to second screen and select Insc..
2. Select Select an Inscript.
3. Key in the inscription number and press Yes/Enter OR scroll through inscriptions and then
select the inscription.
4. You return to the Home screen with the name of the inscription listed on the second screen.
Pitney Bowes Operator Guide September 2023 28