Apply Postage Using Differential Weighing Mode - Pitney Bowes DMI100i Operator's Manual

7. Place the envelope up against the registration wall of the system and slide it to the right until the
system grasps it. The system prints the meter stamp and ejects the envelope/tape sheet.

Apply Postage Using Differential Weighing Mode

Differential weighing is an optional feature that allows you to place multiple items on the scale, remove
one item at a time, rate that item, and put postage on it. This is repeated until you have finished all of
the items on the scale. This procedure is usually done when you have multiple mail pieces with
different weights but all using the same class for rating.
1. Press Weigh/Rate.
2. Select Diff. weighing.
3. Place all items on the scale.
4. Select the desired class by pressing the key next to the class name (use the scroll keys to see
additional classes).
5. If there is no value next to the class name, more information is needed. Follow the prompts for
the options and/or services available for this class of service. The last screen is usually
"Services" and lists special services such as COD and Insurance. If you are unsure if a
particular class is valid for your mail piece, call your local post office or visit
www.pitneybowes.com.
6. Select Done when finished entering all the class options and fees.
7. Remove one item from the scale.
Pitney Bowes Operator Guide September 2023
Running Mail
37