Table of Contents
Advertisement
Running Mail
9. Place the envelope up against the registration wall of the system and slide it to the right until the
system grasps it. The system prints the meter stamp and ejects the envelope/tape sheet.
Applying Postage Entering Weight In Manually
This procedure can be used when you already know the weight of a mail piece and you are not using
the integrated weighing platform.
1. Press Weigh/Rate.
2. Select Enter Manual Weight.
3. Key in pounds and select Set Pounds (maximum is 70 lbs.).
4. Key in ounces and select Set oz and Continue.
5. Select the desired class by pressing the key next to the class name (use the scroll keys to see
additional classes).
6. If there is no value next to the class name, more information is needed. Follow the prompts for
the options and/or services available for this class of service. The last screen is usually
"Services" and lists special services such as COD and Insurance. If you are unsure if a
particular class is valid for your mail piece, call your local post office or visit
www.pitneybowes.com.
7. Select Done when finished entering all the class options and fees.
Pitney Bowes
Operator Guide
September 2023
34
Advertisement
Table of Contents
