Standards And Certifications; Device Overview - Bender ISOMETER isoGEN423 Manual

Weight
Option W
6.2

Standards and certifications

The ISOMETER® was developed in compliance with the standards specified in the Declaration of Conformity.
EU Declaration of Conformity
Hereby, Bender GmbH & Co. KG declares that the device covered by the Radio Directive complies with
Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following Internet
address:
https://www.bender.de/fileadmin/content/Products/CE/CEKO_isoXX425.pdf
UKCA Declaration of Conformity
Hereby, Bender GmbH & Co. KG declares that this device is in compliance with Radio Equipment Regulations
2017 (S.I. 2017/1206). The full text of the UK declaration of conformity is available at the following internet
address:
https://www.bender.de/fileadmin/content/Products/UKCA/UKCA_isoXX425.pdf
6.3

Device overview

Model
isoGEN423-D4-4
isoGEN423-D4W-4
1) Push-wire terminal version
2) Screw-type terminal version
3) Option W: Increased shock and vibration resistance 3K23; 3M12; –40...+70 °C
Accessories
Mounting clip for screw mounting
XM420 mounting frame
Supply voltage U
3(N)AC, AC/DC 0...400 V
Description
isoGEN423-D4W-4 for use in special climatic conditions
s
isoGEN423_D00221_05_M_XXEN
ISOMETER® isoGEN423
≤ 150 g
Article number
B71036325 1)
B91036325 2)
B71036325W 1)3)
Article number
B98060008
B990994
45