ABB RELION 670 Series Applications Manual page 347

1MRK 505 337-UUS A
Name of OUTx
OUT14
OUT15
OUT16
The sum of the numbers in column "Value when activated" when all OUTx (1≤x≤16) are active
equals 65535. This is the highest integer that can be converted by the ITBGAPC function block.
13.11 Elapsed time integrator with limit transgression and
overflow supervision TEIGAPC
13.11.1 Identification
Function Description
Elapsed time integrator
13.11.2 Application
The function TEIGAPC is used for user-defined logics and it can also be used for different
purposes internally in the IED. An application example is the integration of elapsed time during the
measurement of neutral point voltage or neutral current at earth-fault conditions.
Settable time limits for warning and alarm are provided. The time limit for overflow indication is
fixed to 999999.9 seconds.
13.11.3 Setting guidelines
The settings
resolution of the settings depends on the level of the values defined.
A resolution of 10 ms can be achieved when the settings are defined within the range
1.00 second ≤ tAlarm ≤ 99 999.99 seconds
1.00 second ≤ tWarning ≤ 99 999.99 seconds.
If the values are above this range the resolution becomes lower
99 999.99 seconds ≤ tAlarm ≤ 999 999.9 seconds
99 999.99 seconds≤ tWarning ≤ 999 999.9 seconds
Application manual
Type
BOOLEAN
BOOLEAN
BOOLEAN
IEC 61850
identification
TEIGAPC
tAlarm and tWarning are user settable limits defined in seconds. The achievable
Note that tAlarm and tWarning are independent settings, that is, there is no check
tAlarm > tWarning .
if
Description Value when activated Value when
Output 14 8192
Output 15 16384
Output 16 32768
IEC 60617
identification
-
deactivated
0
0
0
GUID-1913E066-37D1-4689-9178-5B3C8B029815 v2
ANSI/IEEE C37.2 device
number
-
GUID-B4B47167-C8DE-4496-AEF1-5F0FD1768A87 v2
GUID-2911D624-87D5-4427-BB2F-E0D1072394FA v2
Section 13
Logic
341