ABB RELION 670 Series Applications Manual page 336

Busbar protection

Hide thumbs Also See for RELION 670 Series:

Table of Contents

Disabled, sets all outputs to 0, independent of the values sent from the station level, that is,

the operator station or remote-control gateway.

Steady, sets the outputs to a steady signal 0 or 1, depending on the values sent from the

station level.

Pulse, gives a pulse with 100 ms duration, if a value sent from the station level is changed

from 0 to 1. That means the configured logic connected to the command function block may

not have a cycle time longer than the cycle time for the command function block.

1MRK 505 337-UUS A

Application manual