ABB RELION 670 Series Applications Manual page 330

Section 12
Control
12.5.3 Setting guidelines
The following settings are available for the Logic rotating switch for function selection and LHMI
presentation (SLGAPC) function:
Operation : Sets the operation of the function Enabled or Disabled .
NrPos : Sets the number of positions in the switch (max. 32).
OutType : Steady or Pulsed .
tPulse : In case of a pulsed output, it gives the length of the pulse (in seconds).
tDelay : The delay between the UP or DOWN activation signal positive front and the output
activation.
StopAtExtremes : Sets the behavior of the switch at the end positions – if set to Disabled , when
pressing UP while on first position, the switch will jump to the last position; when pressing DOWN
at the last position, the switch will jump to the first position; when set to
allowed.
12.6 Selector mini switch VSGAPC
12.6.1 Identification
Function description
Selector mini switch
12.6.2 Application
Selector mini switch (VSGAPC) function is a multipurpose function used in the configuration tool
in PCM600 for a variety of applications, as a general purpose switch. VSGAPC can be used for both
acquiring an external switch position (through the IPOS1 and the IPOS2 inputs) and represent it
through the single line diagram symbols (or use it in the configuration through the outputs POS1
and POS2) as well as, a command function (controlled by the PSTO input), giving switching
commands through the CMDPOS12 and CMDPOS21 outputs.
The output POSITION is an integer output, showing the actual position as an integer number 0 – 3.
An example where VSGAPC is configured to switch Autorecloser enabled–disabled from a button
symbol on the local HMI is shown in
normally used for enable–disable operations of the circuit breaker.
324
IEC 61850 IEC 60617
identification identification
VSGAPC -
figure 167. The Close and Open buttons on the local HMI are
1MRK 505 337-UUS A
SEMOD115063-294 v6
Enabled , no jump will be
ANSI/IEEE C37.2
device number
-
Application manual
SEMOD158754-1 v3
SEMOD167850-2 v3
SEMOD158803-5 v6