1MRK 505 337-UUS A
IEC13000016 V2 EN-US
Figure 123: APC - Local remote function block
12.3.1.2
Switch controller (SCSWI)
SCSWI may handle and operate on one three-phase device or three one-phase switching devices.
After the selection of an apparatus and before the execution, the switch controller performs the
following checks and actions:
•
A request initiates to reserve other bays to prevent simultaneous operation.
•
Actual position inputs for interlocking information are read and evaluated if the operation is
permitted.
•
The synchronism check/synchronizing conditions are read and checked, and performs
operation upon positive response.
•
The blocking conditions are evaluated
•
The position indications are evaluated according to given command and its requested
direction (open or closed).
The command sequence is supervised regarding the time between:
•
Select and execute.
•
Select and until the reservation is granted.
•
Execute and the final end position of the apparatus.
•
Execute and valid close conditions from the synchronism check.
Application manual
IEC13000016-2-en.vsd
Section 12
Control
M16596-3 v4
283