ABB RELION 670 Series Applications Manual page 338

Section 13
Logic
13.2.2 Application
Group alarm logic function ALMCALH is used to route alarm signals to different LEDs and/or
output contacts on the IED.
ALMCALH output signal and the physical outputs allows the user to adapt the alarm signal to
physical tripping outputs according to the specific application needs.
13.2.3 Setting guidelines
Operation : Enabled or Disabled
13.3 Logic for group alarm WRNCALH
13.3.1 Logic for group warning WRNCALH
13.3.1.1 Identification
Function description
Logic for group warning
13.3.1.2 Application
Group warning logic function WRNCALH is used to route warning signals to LEDs and/or output
contacts on the IED.
WRNCALH output signal WARNING and the physical outputs allows the user to adapt the warning
signal to physical tripping outputs according to the specific application needs.
13.3.1.3 Setting guidelines
OperationEnabled or Disabled
13.4 Logic for group indication INDCALH
13.4.1 Logic for group indication INDCALH
13.4.1.1 Identification
Function description
Logic for group indication
332
IEC 61850 IEC 60617
identification identification
WRNCALH -
IEC 61850 IEC 60617
identification identification
INDCALH -
1MRK 505 337-UUS A
GUID-70B268A9-B248-422D-9896-89FECFF80B75 v1
GUID-0BDD898A-360B-4443-A5CF-7619C80A17F4 v2
GUID-3EBD3D5B-F506-4557-88D7-DFC0BD21C690 v3
GUID-3EBD3D5B-F506-4557-88D7-DFC0BD21C690 v3
ANSI/IEEE C37.2
device number
-
GUID-FC0DBB7B-FF86-44BF-83D6-DDF120A176DE v1
GUID-B08F2636-33DA-4937-92EB-1A8AC0909AB4 v2
GUID-3B5D4371-420D-4249-B6A4-5A168920D635 v3
GUID-3B5D4371-420D-4249-B6A4-5A168920D635 v3
ANSI/IEEE C37.2
device number
-
Application manual