Restored To The Default Settings - CP Plus CP-RMC-D12 User Manual

Step 2 Select a file and click Import.
After the import is completed, the system prompts that the settings will take effect
after reboot. Click OK.
The system starts rebooting.

4.8.7 Restored to the Default Settings

You can restore the system to default configurations or the factory default. Only the user with
the default & upgrade authorities can do this.
CAUTION
The corresponding functions will be restored to the factory settings, and your current
configurations will be lost. Proceed with caution.
Step 1 Select SYSTEM > DEFAULT.
The DEFAULT interface is displayed. See Figure 4-106.
Step 2 Select the check box of the options that you want to restore to the factory default.
Default: Select the options, and then click Default. In the pop-up message, click
OK. The selected options will be restored to the factory default settings.
Restore the factory settings: Click Restore the factory settings. In the pop-up
message, click OK. The system starts rebooting. After the device is rebooted, the
system will return to the default settings and needs to be initialized again. Proceed
with caution.
When there is a user operating on the local interface, the factory default settings
cannot be performed until the local user log out.
Figure 4-106 Restored to the Default Settings