About Audio And Video Output - CP Plus CP-RMC-D12 User Manual

Mobile digital video recorder
Table of Contents

Advertisement

Step 8 Inset the Ethernet plug into the Ethernet port, and then tighten the waterproof connector.
See Figure 2-35.
See Figure 2-36 for the connected waterproof connector.

2.4.2 About audio and video output

Video Output
The Device is provided with one CVBS (PAL/NTSC 1.0V
supports the simultaneous output from these two ports.
Read the following contents carefully before using the computer instead of monitor.
For VGA output, you need to prepare a VGAadapter cable to connect to computer.
To extend the Device life, do not keep the Device running for a long time.
Regular demagnetizing helps keep the monitor working properly.
Stay away from devices with strong electromagnetic interference.
Audio output
The audio output signal parameter is larger than 200mv 1KΩ. The audio output port can directly
connect to the display with audio function on the vehicle or active speaker, and the port can
also drive other sound output devices through amplifier.
Figure 2-34 Rubber gasket installation
Figure 2-35 Waterproof connector fastening
Figure 2-36 Connection completed
, 75Ω) port and VGA port, and
P-P

Advertisement

Table of Contents
loading

Table of Contents