Figure 2-31 Vehicle main switch installed on the negative pole of the vehicle battery
2.4 Audio and Video Input and Output Connection
This section helps you understand the connection of audio and video input and output when
you need to use this function.
2.4.1 About audio and video input
The video and audio data is input through RJ45 network port. When connecting cable, the
waterproof connector needs to be installed.
Step 5
Take out the waterproof connector from the accessory box, and connect the gasket
toward the arrow direction onto the waterproof connector. See Figure 2-32.
Put the network cable (without Ethernet port) through the main part of waterproof
Step 6
connector, gasket and encamp, and then make the Ethernet plug. See Figure 2-
33.
Step 7
Connect the rubber gasket to the Ethernet port. See Figure 2-34.
Figure 2-32 Gasket installation
Figure 2-33 Cabling and Ethernet plug making