Backing Up And Restoring - CP Plus CP-RMC-D12 User Manual

immediately. When the ACC of the vehicle is off after booting up, the device will be shut down
according to the preset automatic shutdown delay time.
Step 4 Select Main Menu > SYSTEM > SYSTEM MAINTENANCE.
The SYSTEM MAINTENANCE interface is displayed.
Step 5 In the Auto Boot up area, select Valid, and then enter the specific time.
Step 6 Click OK.
4.8.5.4 Configuring auto shutdown system
After configuring auto shutdown, the Device automatically shuts down according to the ACC
power off time and auto boot up setting.
If you have set the time for auto boot up, there are two situations when the ACC is
powered off: If the system time is between the auto boot up and auto shutdown, the
Device is turned off at the configured time. If the system time is before the auto boot up
or after the auto shutdown, the Device is turned off immediately.
If the auto boot up is not set, when the ACC is disconnected, the Device shuts down at
the scheduled time.
Step 1 Select Main Menu > SYSTEM > SYSTEM MAINTENANCE.
The SYSTEM MAINTENANCE interface is displayed.
Step 2 In Auto Shutdown System, select Every day, and then enter the specific time.
Step 3 Click OK.

4.8.6 Backing Up and Restoring

4.8.6.1 Backing up Configurations
You can back up all configuration information.
Preconditions
Make sure the external storage device such as USB flash disk is connected to the Device.
Steps
Step 1 Select Main Menu > SYSTEM > CONFIGURE BACKUP.
The CONFIGURE BACKUP interface is displayed. If the external storage device is
connected before the interface is entered, the system will automatically identify the
information of the external storage device, see Figure 4-104.
If the external storage device is connected after the interface is entered, click
Refresh and the system will recognize the connected external storage device.