Dimension And Installation; Out-Of-Box Audit; Device Structure; Front Panel - CP Plus CP-RMC-D12 User Manual

2

Dimension and Installation

Describes the installation of hardware. Prior to installation, you need to know about the front
panel, rear panel, structural sizes, and interface definition of the device. Then you can install
corresponding HDD, SIM card, SD card, antenna, and devices.

2.1 Out-of-box Audit

When you receive the Device, unpack the box for checks.
Firstly, check if there is any damage on the Device appearance (although the packing materials
are specially selected for protecting the Device from most of accidental hit during
transportation). Secondly, open the accessory box to check if the accessories are complete
against the packing list.
Instructions about front panel, rear panel, and labels:
The functions of indicator lights and ports are described in the later chapter of the Manual.
The labels on the Device are very important for our after-sales service. To ensure the
after-sales service, keep the labels well, and do not tear or throw away. You need to
provide the serial number of the product when calling the after-sales service.

2.2 Device Structure

2.2.1 Front Panel

Describes the functions of the indicators and interfaces of the front panel.
No. Name
RJ-45 network port
1
USB interface
Figure 2-1 CP-UVR-0401E1-PG front panel
Table 2-1 Descriptions of interfaces and indicators
Descriptions of interfaces and indicators
One network port.
Two USB ports that connect to peripheral devices such as
USB storage device and mouse.