Table of Contents
Advertisement
Name
Disk full
Packaging
manner
Auto Logout
Startup
Wizard
License No.
IPC Time
Sync
Step 3 Click Save.
5.3.2.2 Date and Time Settings
You can configure settings such as date format, time format, and timing mode.
Step 1 Select SETUP > SYSTEM > GENERAL > Date &Time.
The Date &Time interface is displayed. See Figure 5-8.
Step 2 Configure TCP/IP parameters. For details, see Table 5-3.
Name
Date format
Time format
Description
Configure the settings for the situation when HDD is full, including stop and
overlap
Stop: When the HDD is full and there is no extra free disk, the recording
stops
Overlap: When the HDD is full and there is no extra free disk, the new
recorded video overlaps the old videos
Enter the length of time for packaging each video file. The maximum length is
120 minutes
Enter the time period for automatic logout if there are no operations during this
period. In this case, you need to login again
The value ranges from 0 minutes through 60 minutes. 0 indicates there is not
standby time for the Device
Set whether to open the software license agreement.
Enter the license plate number of vehicle where the Device is located
You can select the IPC Time Sync check box and enter the interval for IPC
sync with the Device
Figure 5-8 Date and time settings
Table 5-3 Date and time settings parameters description
Description
Select a date format
Select a time format
Advertisement
Table of Contents
