CP Plus CP-RMC-D12 User Manual page 105

You can set up the HDD as the read/write disk and redundancy HDD in the Type column.
Read/Write: Read HDD data and save data to HDD.
Redundancy HDD: If more than two HDDs are connected to the device or SD card, one
HDD can be set to the redundancy HDD for recording backup.
Select the HDD and click Formatting to clear all data from the HDD. Proceed with caution.
4.6.4.3 Setting FTP storage
Back up recorded videos and images to the preset FTP (File Transfer Protocol) server for
storage.
Preconditions
Make sure you have purchased or download a FTP server and installed it on your PC.
NOTE
For the created FTP user, you need to set the write permission; otherwise the upload of
recorded videos and snapshots will be failed.
Steps
Step 1 In the main menu, select STORAGE > FTP.
The FTP interface is displayed, see Figure 4-73.
Figure 4-72 Disk management