CP Plus CP-RMC-D12 User Manual page 89

Step 2 Select Superposition Coding or Preview Overlay according to overlay information.
In the Superposition Coding interface, select channel to overlay the time
display, channel display, GPS display and license no. display in video images.
You can customize the channel display.
In the Preview Overlay interface, overlay channel display and GPS display.
Step 3 Click Apply.
4.6.1.3 Configuring PoE
Review the connection status of the PoE port and reset the camera.
Select Camera > PoE in the main menu. The PoE interface is displayed. See Figure 5-46.
Click
but offline so that the camera can be online. If the camera is still offline after reset for 3 times,
the system will not reset again.
When the total power of the cameras accessed through PoE exceeds the maximum power of
the device, the device will force the camera connected to the maximum port number to go
offline until the total power of the camera accessed through PoE does not exceed the
maximum power of the device.
Figure 4-57 Superposition Coding
to turn on PoE reset function and click Apply to reset the camera with power