Step 3
Select the reset type based on your needs. It is recommended to enable the two types
as follows.
Check the Phone No. box, and then enter the phone number in the box.
Check the Security Question box, select the question and enter the corresponding
answer.
Step 4
Click Next.
The completion interface is displayed. See Figure 5-3.
Step 5 Click Save.
5.2 Logging into the Device
You can login to and then configure the device.
Step 1 Open the browser, enter the Device IP address, and then press Enter.
The Login interface is displayed. See Figure 5-4.
Figure 5-2 Password protection
Figure 5-3 Complete