Configuring Vehicle Settings - CP Plus CP-RMC-D12 User Manual

4.6.9 Configuring Vehicle Settings

4.6.9.1 Configuring Speed
Step 1
Select Main Menu > OTHERS > VEHICLE > SPEED.
The SPEED interface is displayed. See Figure 4-87.
Sets up DBHA parameters. See Table 4-28 for details.
Step 2
Name
Speed Ratio
Mileage
Cumulation
Mileage
Start Mileage
Speed source
Step 3 Click Apply.
4.6.9.2 Configuring Gyro
Used to detect the rollover, collision, sharp turn, rapid acceleration or deceleration of the
vehicle.
Figure 4-87 Speed
Table 4-28 Speed parameters description
Description
The parameter for converting speed
Select the vehicle mileage cumulation mode
Displays the total mileage
Enter the initial mileage of the vehicle
Select where the speed is obtained, including Pulse, Positioning Info, and
Pulse & Positioning Info
Pulse 1: Get the speed information from vehicle pulse system
Positioning Info: Get the speed information from positioning system
Pulse & Positioning Info: Get the speed data from both the pulse
system and positioning system. Data from the impulse system is used
first
Local Configurations 111