Device Initialization - CP Plus CP-UNR-4K2042-V2 Quick Start Manual

8. Device Initialization

If it is your first time to use the device, please set a login password of admin (system default user).
Note
For your device safety, please keep your login password of admin well after the initialization steps, and
change the password regularly.
Steps:
Step 1 Boot up device.
Device displays device initialization interface. See Figure 4
Step 2 Set login password of admin.
 User name: The default user name is admin.
 Password/confirm password: The password ranges from 8 to 32 digitals. It can contain letters,
numbers and special characters (excluding "'",""",";",":","&") . The password shall contain
at least two categories. Usually we recommend the strong password.
 Prompt question: If you set the prompt question here. On the login interface, click
display the corresponding prompt question for you to remind the password.
WARNING
STRONG PASSWORD RECOMMENDED-For your device own safety, please create a strong
password of your own choosing. We also recommend you change your password
periodically especially in the high security system.
Step 3 Click Next.
Device goes to unlock pattern interface. See Figure 5
Figure 4
, device can
8