5.4.4 Live
When this field is set to "ON," the selected channel can be viewed in live view mode; when
"OFF" has been selected, it cannot.
5.4.5 Audio (Sound Settings)
- (optional)
The audio input for the selected channel can be set up using this field. The options include
"UNBIND," "CH1," "CH2," "CH3," and "CH4." For example, if the selected channel is CH1
and the selected "AUDIO" setting is "UNBIND," there will be no sound audible for CH1; if the
selected channel is CH1 and the selected "AUDIO" setting is "CH2", the sound input of CH2
will play on CH1.
5.4.6 Color
To enter the "Color Setup" menu, click "System Settings," then click "Video" and select
"Color." From this menu, the video color attributes can be adjusted for the best image quality.
By default, the values are set at 31, as this is the median
value. Make adjustments to the hue, brightness, contrast,
and/or saturation as appropriate depending on the actual
conditions at the location where the camera is installed
.
Press "►" or "◄" or click the vertical bar on the slide
bar and drag the cursor to the left or right along the
slide bar to set color attributes. Clicking the
"DEFAULT" button will reset the color attributes to
their original values. Once the color attributes have
been set, press "
" to save the settings.
5.4.7 Record Time
From this field, users can decide which information will be recorded onto the video as the OSD
(On-Screen Display) string.
5.4.8 Video Margin
To enter the "Video Margin" menu, click "System Settings," then click "Video," and select
"Margin."The entire video screen can be moved up, down, to the left, and to the right using this
option.
5.4.9 Video Setup
To enter the "Video Setup" menu, click "System
Settings," then click "Video," and select "Video
Setup."
VGA resolution: The options are 1024x768(VGA)
and 1280x1024 (VGA); for 16-CH DVRs, there is
also a 1920x1080 (HDMI) option.
Sequential Time (SEC): This refers to the
40