Installation Configuration; Power And Startup - Polycom SoundStation IP 6000 User Manual

User Guide for the Polycom SoundStation IP 6000 Phone

Installation Configuration

Symptom
The display shows:
"General configuration error
Unsupported configuration
Undo last configuration change."

Power and Startup

Symptom
The display shows "Network Link
is Down."
5 - 2
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 4846
Problem
The phone installation
configuration is not supported.
Problem
The network cable is not properly
connected.
Corrective Action
Verify that you have installed the phone
and any components correctly:
See Installing the Phone
•
Check that no more than two
•
microphones are installed.
Contact your system administrator.
•
Corrective Action
Verify that the network cable is properly
connected:
Check the cable termination at the
•
switch or hub (furthest end of the
cable from the phone).
Check that the switch or hub is
•
operational (flashing link/status
lights).
Check if the LAN port is active or
•
inactive. Press the Menu key, and
then select Status > Network >
Ethernet. From the Ethernet screen,
scroll to LAN port and verify that it is
Active.
To attempt re-registration with the call
•
server, reboot the phone. For more
information, see your system
administrator.
Contact your system administrator.
•
on page 1-2.