Installation Configuration; Power And Startup - Polycom SoundStation IP 6000 User Manual

User Guide for the Polycom SoundStation IP 6000 Phone

Installation Configuration

Symptom
The display shows:
General configuration error
Unsupported configuration
Undo last configuration change

Power and Startup

Symptom
The display shows Network Link
is Down.
5 - 2
Problem
The phone installation
configuration is not supported.
Problem
The network cable is not properly
connected.
Corrective Action
Verify that you have installed the phone
and any components correctly:
See Setting Up the Phone
•
1-2.
Check that no more than two
•
microphones are installed.
Contact your system administrator.
•
Corrective Action
Verify that the network cable is properly
connected:
Check the cable termination at the
•
switch or hub (furthest end of the
cable from the phone).
Check that the switch or hub is
•
operational (flashing link/status
lights).
Check if the LAN port is active or
•
inactive. Press
Status > Network > Ethernet. From
the Ethernet screen, scroll to
LAN port and verify that it is Active.
To attempt re-registration with the call
•
server, reboot the phone. For more
information, see your system
administrator.
Contact your system administrator.
•
on page
, and then select