Cargo Camera - If Equipped - RAM 2500 2020 Quick Reference Manual

PARKVIEW
PARKVIEW REAR BACK UP
CAMERA
You can see an on-screen image of the rear
of your vehicle whenever the transmission is
shifted into REVERSE. The ParkView Rear
Back Up Camera image will be displayed on
the Uconnect Display, located on the center
stack of the instrument panel.
CARGO FEATURES
CARGO LIGHTS/TRAILER
SPOTTER LIGHTS WITH
BED LIGHTS — IF EQUIPPED
• The cargo light and bed lights (if
equipped) and trailer spotter lights (if
equipped) are turned on by pushing the
cargo lights button located on the lower
half of the headlight switch.
• If the vehicle's speed is 0 mph (0 km/h),
these lights can also be turned on using
the switch located just inside the pickup
box, on the lower part of the bed light lens.
A telltale will illuminate in the instrument
cluster display when these lights are on.
Pushing the switch a second time will turn
the lights off.
Cargo/Bed Lights Button On Headlight Switch
Bed Light Switch Without RamBox
NOTE:
The cargo light and bed lights (if equipped)
will turn on for approximately 30 seconds
when a key fob unlock button is pushed, as
part of the Illuminated Entry feature.
CARGO CAMERA — IF
EQUIPPED
• Your vehicle may be equipped with a
Cargo Camera that allows you to see an
image of the inside of the pickup box. The
image will be displayed on the Uconnect
Display, located on the center stack of the
instrument panel.
• A display timer is initiated when the Cargo
Camera image is displayed. The image will