Modbus TCP
7.1 Functions/parameters/address space
7.1.2
Parameters
Parameters
The following table shows the parameters that you can set for each port (each submodule) of
the IO-Link master CM 8xIO-Link + DIQ 8x24VDC M12-L.
Table 7- 1
Diagnostics
Diagnostics undervoltage 1L+
Diagnostics: Port
Hardware interrupt (device
notification)
Port configuration
Port configuration without S7-
PCT
Operating mode
Vendor ID**
DeviceID*
62
Diagnostics and port parameter IO-Link port
Parameters
•
•
•
•
•
•
•
•
•
•
Vendor ID of the
connected IO-Link
device
Device ID of the con-
nected IO-Link device
CM 8x IO-Link + DIQ 8x24VDC M12-L 8xM12 (6ES7148-6JJ00-0BB0) communications module
Value range
Disable
Disable
Enable
Disable
Disable
Enable
Disable
Disable
Enable
Disable
Disable
Enable
IO-Link autostart
IO-Link autostart
IO-Link manual
0
0
Equipment Manual, 12/2022, A5E51718265-AB
Default
Effective range with
configuration soft-
ware, for example,
MFCT
Channel
Channel
Channel
Channel
Channel
Channel
Channel