Siemens SIMATIC ET 200eco PN M12-L Equipment Manual page 81

Technical specifications
Article number
•
•
•
•
•
•
•
•
•
•
Potential separation
between the load voltages
between Ethernet and electronics
Potential separation channels
•
•
Isolation
tested with
•
•
Degree and class of protection
IP degree of protection
Standards, approvals, certificates
Suitable for safety-related tripping of standard
modules
Highest safety class achievable for safety-
related tripping of standard modules
•
•
•
Ambient conditions
Ambient temperature during operation
•
•
Altitude during operation relating to sea level
•
80
ERROR LED
MAINT LED
Monitoring of the supply voltage (PWR-LED)
NS LED
MS LED
IO LED
Channel status display
for channel diagnostics
For load voltage monitoring
Connection display LINK TX/RX
between the channels
between the channels and the power supply
of the electronics
24 V DC circuits
Test voltage for interface, rms value [Vrms]
Performance level according to ISO 13849-1
Category according to ISO 13849-1
SIL acc. to IEC 62061
min.
max.
Ambient air temperature-barometric pressure-
altitude
CM 8x IO-Link + DIQ 8x24VDC M12-L 8xM12 (6ES7148-6JJ00-0BB0) communications module
6ES7148-6JJ00-0BB0
Yes; red LED
Yes; Yellow LED
No
Yes; green/red LED
Yes; green/red LED
Yes; red-green-yellow LED
Yes; green LED
Yes; red LED
Yes; green LED
Yes; green LED, only link
Yes
Yes
No
No
707 V DC (type test)
1 500 V; According to IEEE 802.3
IP65/67
No
PL d
Cat. 3
SIL 2
-40 °C
60 °C
Up to max. 5 000 m, at installation height >
2 000 m additional restrictions
Equipment Manual, 12/2022, A5E51718265-AB