Chassis Cover - Supero SUPERSERVER 6027PR-HC0R User Manual

6-3

Chassis Cover

Before operating the server for the first time, it is important to remove the protective
film covering the top of the chassis, in order to allow for proper ventilation and
cooling.
Removing the Chassis Cover and Protective Film (Figure 6-2)
1. Remove the two screws which secure the top cover onto the chassis as shown
above.
2. Lift the top cover up and off the chassis.
3. Peel off the protective film covering the top cover and the top of the chassis
4. Check that all ventilation openings on the top cover and the top of the chassis
are clear and unobstructed.
1
3
Caution: Except for short periods of time, do not operate the server without the
cover in place. The chassis cover must be in place to allow proper airflow and
prevent overheating.
1
1
Remove two screws
Figure 6-2. Removing the Chassis Cover
Chapter 6: Advanced Chassis Setup
1
2
1
4
Check Ventilation
Openings
6-3