Table of Contents
Advertisement
6. Loosen the three screws in the spring bar, located on the floor of the chassis,
indicated by the arrows below (Figure 6-7).
1
7
Figure 6-7. Loosening the Spring Bar Screws in the Floor of the Chassis
7. Remove the side screw from the side of the chassis (Figure 6-7).
8. Gently ease the backplane up and out of the chassis (Figure 6-8).
Figure 6-8. Removing the Backplane from the Chassis
Chapter 6: Advanced Chassis Setup
1
8
6-9
1
6
Advertisement
Table of Contents
