Table of Contents
Advertisement
HDD/SATA LED (LE3)
An HDD/SATA LED Indicator is located
at LE3 on the serverboard. This LED
indicates the status of hard drive
activities or SATA activities. Also see
the layout below for the LED locations.
Onboard Power LED
An Onboard Power LED is located
at LE1
on the serverboard. When
this LED is on, the system is on. Be
sure to turn off the system and unplug
the power cord before removing or
installing components. See the tables
on the right for more information.
Rear UID LED
The rear UID LED is located at
U I D L E D 1 o n t h e r e a r o f t h e
serverboard. This LED is used in
conjunction with the rear UID switch to
provide easy identification of a system
that might be in need of service. Refer
to UID Switch on Page 5-18 for more
information.
InfiniBand LED Indicators
T h e X 9 D R T- P I B F s e r v e r b o a r d
has two InfiniBand LED Indicators
(LEB1/LEB2) that are located on the
serverboard. The green LED (LEB1)
is the InfiniBand Link LED. The yellow
LED (LEB2) indicates activity. Refer to
the table on the right for details.
Chapter 5: Advanced Serverboard Setup
HDD/SATA LED (LE3)
Status
On
Off
Onboard PWR LED Indicator (LE1)
LED Settings
LED Color
Off
Green
Green: Flashing
Quickly
UID LED (UIDLED1)
Color/State
Blue: On
Blue: Blinking
InfiniBand Link LED (LEB1)
Color
Status
Green
Solid
Off
Off
InfiniBand Activity LED (LEB2)
Color
Status
Yellow
Solid
Yellow
Dim
Off
Off
5-23
Settings
Definition
HDD/SATA Connected
No connection
Status
System Off (PWR cable
not connected)
System On
ACPI S1 State
Status
OS
Status
Windows OS
Unit Identified
Linux OS
Unit Identified
Settings
Definition
InfiniBand Connected
No connection
Settings
Definition
InfiniBand: Active
InfiniBand: Connected,
Activity: Idle
No connection
Advertisement
Table of Contents
