Chassis Cover - Supero SUPERSERVER 2028TP-HTR User Manual

6-3

Chassis Cover

Before operating the SC217HQ+ chassis for the first time, it is important to remove
the protective film covering the top of the chassis, in order to allow for proper
ventilation and cooling.
Removing the Chassis Cover and Protective Film (Figure 6-2)
1. Uplug the AC power cord from any external power source.
2. Remove the two screws which secure the top cover onto the chassis as
shown above.
3. Lift the top cover up and off the chassis.
4. Peel off the protective film covering the top cover and the top of the chassis
5. Check that all ventilation openings on the top cover and the top of the chassis
are clear and unobstructed.
6. Replace the chassis cover and reconnect the AC power cord.
1
4
Caution: Except for short periods of time, do NOT operate the server without the
cover in place. The chassis cover must be in place to allow proper airflow and prevent
overheating.
Figure 6-2. Removing the Chassis Cover
1
2
Remove two
screws
Chapter 6: Advanced Chassis Setup
1
3
Check Ventilation
Openings
6-3
1
5