Supero SUPERSERVER 6027PR-HC0R User Manual page 61

Notes:
1. For the latest CPU/Memory updates, please refer to our website at
www.supermicro.com/products/motherboard/
2. Use only the correct type of onboard CMOS battery as specified by the
manufacturer. Do not install the onboard battery upside down to avoid
possible explosion.
3. " " indicates the location of "Pin 1".
4. The add-on card header located at JF2 for an proprietary add-on card to
provide power, SATA and front panel control support.
5. When the Onboard Power LED (LE1) is on, the system power is on. Unplug
the power cable before installing or removing any components.
6. Changing BMC log-in information is recommended upon system bootup.
The default username is ADMIN and password is ADMIN. For BMC best
practices, please refer to:
Best_Practices_BMC_Security.pdf.
Jumper Description
JBT1
Clear CMOS
JIB1
InfiniBand (IB) Enable (for X9DRT-PIBF Only)
JI C1/JI C2
2 2
PCI-Exp. Slot to SMC
JPB1 BMC Enable
JPG1 VGA Enable
JPL1 LAN (Ethernet) Port1 Enable
JPME1 Management Engine (ME) Recovery Mode
JPME2 Management Engine (ME) Manufacture Mode
JWD1 Watch Dog
LED Description
LE1 Onboard Power LED
LE3 HDD LED
LEB1 IB (InfiniBand) Link
LEB2 IB (InfiniBand) Activity
LEM1 BMC Heartbeat LED
UID LED1 UID LED
http://www.supermicro.com/products/nfo/files/IPMI/
X9DRT-P/PT/PIBF Quick Reference
State
On
Green: On
Green: On
Yellow: Blinking
Green: Blinking
Blue: On
5-13
Chapter 5: Advanced Serverboard Setup
for details.
Default Setting
Open (Normal)
Pins 1-2 (Enabled)
Open (Normal)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Normal)
Pins 1-2 (Reset)
Status
Power On
HDD/SATA Active
IB Connected
IB Active
BMC Normal
Unit Identified
http://