SUPERSERVER 6027PR-HC0(R/TR/FR) USER'S MANUAL
6-4
Air Shrouds
Air shrouds concentrate airflow to maximize fan efficiency. The SC827HQ+ chassis
air shroud does not require screws to set up. The 6027PR-HC0(R/TR/FR) requires
four identical air shrouds, one in each serverboard drawer (p/n MCP-310-21702-
0B). See the illustration below.
Installing an Air Shroud
1. Confirm that all four fans are in place and are working properly
2. Place the first air shroud into the serverboard drawer. The air shroud sits behind
the system fans and goes over the top of the serverboard and its components.
3. Repeat the procedure for the remaining three serverboard drawers.
Air Shroud
Figure 6-3. Installing the Air Shroud
6-4