maintenance
Valve Replacement
Before you begin:
• Shut off the gas supply to the unit.
• Disconnect all electrical supply to the unit.
• Remove door, see glass door removal section for instructions.
Always let the appliance cool to room temperature before servicing.
When the glass is cold and the appliance is lit, condensation may fog the glass. Condensation is normal and will disappear in a few minutes as the
glass heats up.
1. Remove the pilot cover (3 screws).
2. Remove the burner tray (2 screws).
70
| Gi33 Direct Vent Gas Insert
3. Slide burner tray to the left and out.
4. Remove the light tray by removing the 12 screws and disconnecting the
light tray cable underneath.
4. Remove the light tray by removing the 12 screws and disconnecting the light tray cable underneath.