installation
Alternate Approved Vertical Termination Caps
Alternate Approved Caps
Option 1
46DVA-CL34 - Vertical High Wind Cap With Flashing. Also includes 3" (76 mm) x 35' (10.7 m)Air Inlet Liner & 4" (102 mm) x 35' (10.7 m)Exhaust Liner
Option 2
46DVA-34CLTA Chimney Liner Conversion From Co-linear To Co-Axial (Includes Flashing)
+
46DVA-VCH Vertical High Wind Cap
Note: Both Air Inlet/Exhaust Liners Would Need To Be Purchased Separately with Option 2 as they are not included.
With option 2, Simpson Duravent pipe lengths can be added if required to meet clearance requirements.
The air intake pipe must be attached to the inlet air collar of the termination cap.
26
| Gi33 Direct Vent Gas Insert