Table of Contents
Advertisement
maintenance
Light Bulb Replacement
1. Remove screen, glass door, logs and any other media, log grate, and lower
panel (if installed).
2. Remove two (2) screws from light assembly cover in the locations shown
below.
3. Lift the light assembly cover out of the way.
4. Install or replace bulbs as required.
NOTE: Do not touch bulbs with bare hands, use gloves or a tissue when handling
bulbs. Part # of each bottom bulb is 911-297. There are 4 per unit.
5. Reverse steps to reassemble unit.
72
| Gi33 Direct Vent Gas Insert
Advertisement
Table of Contents
